The MCW-211 is an Industrial Ethernet FX/TX Media Converter.
The MCW-211 convert data between Ethernet 10/100 Base-TX and 100 Base-FX.
The unit is easy to use and install caused by auto-negotiation of speed and duplex and auto-crossover and auto-polarity on 10 Mbit/s. The media converter is be transparent for large frames (VLAN or QoS). It is also possible to set speed, duplex and flow control via DIP-switches.
The FX side supports Far-End-Fault indication. A link fault from either side shall be forwarded to the other side, Link Fault Forwarding. Via DIP-switches it is possible to control if both sides or just one (either) side supports LFF.
MCW-211 has a wide DC power input range with polarity protection and redundant power from dual sources. With extended temperature range supported as standard the MCW-211 is designed to be used the harshest environments.
|
 |
 |
Conversion between Ethernet 10/100Base-TX and 100Base-FX |
|
Transparent for large frames (QoS and VLAN) |
|
Galvanic isolation and enhanced surge/transient protection |
|
DIP-switches for:
-Speed, duplex and Auto-negotiation
-Flow control
-Link fault forward |
|
Auto MDI/MDI-X |
|
Extended temperature range –25°C to +70°C |
|
Redundant power and wide DC input range |
|
|
|
|
|
|
|
|
