TD-23 is designed to satisfy industry's demands on reliability and functionality in
environments with high levels of interference.TD-23 communicates via a 2- or
4-wire leased line according to the V.23 standard. Equipment with an RS-232 or
RS-422/485 interface can be connected and communicate point-to-point or in a
multidrop application.The modem is equipped with DIP-switches to set specific
functions in hardware, for example, reception sensitivity, output signal level, etc.
This is of particular importance as it allows each modem to be optimized according
to the line quality. A general calculation allows 16 units over a distance of up to
25 km (15.5 miles).
TD-23 is intended for mounting on a 35 mm DIN-rail, where the modem is
attached and locked in a single action.
|
 |
 |
Data rate 1200 bit/s (V.23) |
|
2-wire (half duplex),4-wire (full duplex) |
|
Number of multidrop points,16 (typical value) |
|
Transmission distance up to 25 km (15.5 miles) |
|
Adjustable output signal level |
|
Adjustable reception sensitivity |
|
Transient protection on the line side |
|
AC-/DC-supply |
|
Tri-Galvanic isolation (interface/line/supply) |
|
|
|
|
|
|
|
|
