The RM-80 provides reliable and secure high-speed wireless Ethernet connectivity
across a broad range of applications in process and automation plants. It is very well
suited for connection to PLC’s, HMI, DCS, data acquisition, video devices and industrial
PC’s.
The RM-80 has an Ethernet port (10/100 BaseT) as well as two serial ports
(RS-232 and RS-485) and on-board I/O for local and remote link status, or external
status transfer. The data rate can be set between 7.2 kbit/s and 76.8 kbit/s or auto
rate selection.
The RM-80 has been designed and built for demanding industrial applications.
A High RF output and superior receiver sensitivity gives excellent penetration in
congested industrial environments, through buildings, factory walls and steelwork.
The RM-80 is equipped with an SMA coaxial antenna connector and can be used
with a wide variety of different antennas. The receiver sensitivity will allow a line-ofsight
range of 5km. The Repeater functionality can increase the wireless range even
further.
|
 |
 |
Industrial Strength 869 MHz |
|
Temperature range –40°C to 60°C |
|
Access Point, Client/Station and Repeater |
|
10/100 BaseT RJ45, IEEE 802.3 compliant. |
|
Bridge/router functions for Ethernet protocols |
|
RS-232 V.24 DCE 1.2 to 115.2 Kb/s |
|
RS-485 1.2 to 115.2 Kb/s |
|
On-board I/O for link status or external |
|
128-bit AES encryption and WEP encryption |
|
Firewall protection using MAC Address filtering |
|
Redundancy using automatic changeover at Access Point |
|
Configuration via web-browser |
|
Remote configuration via the wireless link. |
|
Password protected configuration |
|
|
|
|
|
|
|
|
