The DDW-222 can be used to extend Ethernet networks over existing copper cables in point-to-point, daisy-chain or redundant ring applications. Also included in the DDW-222 is a RS-232 serial adapter and a 10-port Virtual Com port re-director software. The unit supports TCP client, TCP server and UDP protocol modes allowing it to be used in a wide variety of applications. Point-to-point transmission distances of up to 10 km can be achieved with data-rates of 5.7 Mbit/s possible over shorter distances on a single copper pair. The redundant protocol can be used ether on the SHDSL interface or on the built-in Ethernet switch. Our unique FRNT (Fast Recovery of Network Topology) technology is the fastest protocol on the market to re-configure a network in the event of any failure of a link or hardware. The built-in 4 port Ethernet switch makes the DDW-222 the only necessary component required to create a small network. Total galvanic isolation between all interfaces, extended type approvals and rugged mechanical design as well as extensive over-voltage protection and line interface voltage suppression makes the DDW-222 the best solution in harsh industrial environments.
|
 |
 |
RS-232 serial adapter |
|
10 port Virtual Com software |
|
Redundant protocol (FRNT) on SHDSL or on the Ethernet switch |
|
Plug and play |
|
Data rates up to 5,7 Mbit/s |
|
Distance up to 10 km |
|
Extensive line protection |
|
2 x SHDSL |
|
SNMP and comprehensive diagnostic |
|
16 – 60 VDC power supply |
|
Reverse polarity protection |
|
4 ports Ethernet switch |
|
Web interface |
|
Made for extreme environments
• – 40˚C to +70˚C
• Metal housing
• IP 40
• DIN mounting |
|
|
|
|
|
|
|
|
