Did you know that WeConfig can configure a VLAN on a group of switches with only a few clicks of the mouse?

VLANs are becoming one of the most used means of segregating traffic on a network. However configuring a VLAN can be complicated and requires some high-level knowledge. It can be costly to employ consultants or expert personnel that manually perform the configuration on the network. VLAN configuration can now be done with only a few clicks of the mouse, so deploying a VLAN across an existing network is amazingly simple. With the help of the topology map simply select the switches where the edge devices will be connected to the VLAN and all the switches in between. Simply apply the configuration and WeConfig will update the system adding the tagged and untagged ports to the switches.